Stand Mounting The 19" Chassis; Chs2U-Au Chassis Installation; Figure 4-16 Assemble Stand Mount With Screws - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
3.3
System Hardware Manual

Stand Mounting the 19" Chassis

A single or multiple chassis can be stand mounted. Controlling and Expansion
chassis can be stand mounted using the CHS2U STAND KIT(K) and CHS2U
JOINT BRACKET KIT.
3.3.1

CHS2U-AU Chassis Installation

1. Using the supplied screws, assemble the CHS2U STAND KIT(K)
and CHS2U JOINT BRACKET KIT (refer to
Assemble Stand Mount with Screws).

Figure 4-16 Assemble Stand Mount with Screws

Issue No. 1.5
Figure 4-16
Expansion
Plate
4 - 17