Wall Mounting The 19" Chassis; Chs2U-Au Chassis Wall Mount Installation; Figure 4-3 Wall Mount Spacing Guide (19" Chassis) - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
3.1
4 - 6

Wall Mounting the 19" Chassis

When wall mounting the chassis, ensure the wall can support the weight of the
chassis (55 lbs per system chssis ---- including blades, cords, power supply,
etc.). The chassis is secured to the wall with a wall mount bracket. Ensure that
enough space is available to allow the installation of additional expansion
chassis.
3.1.1

CHS2U-AU Chassis Wall Mount Installation

1. Use the template shown in
(19" Chassis) on page 4-6

Figure 4-3 Wall Mount Spacing Guide (19" Chassis)

UNIVERGE SV8100/SV8300
Figure 4-3 Wall Mount Spacing Guide
for required spacing before drilling.
Plywood should first be installed on the
wall where the chassis will be positioned.
This allows secure anchoring of the
screws which support the weight of the
chassis.
Due to chassis weight, NEC recommends
only a single CHS2U-AU chassis per
wall mount.
Upper Surface of Wall Mount Bracket
Installing the SV8100 Chassis