Led Indications; Setting Up Pgd(2)-U( ) Adp Connections; Figure 10-1 Pgd(2)-U( ) Adp; Figure 10-2 Remove Cover From Pgd(2)-U( ) Adp - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
2.2
2.3
10 - 2
The PGD(2)-U( ) ADP connects to any available digital extension port. The
terminal connections made in the PGD(2)-U( ) ADP and the jumper settings
determine what features are used for each circuit.
Channel 1
Status LED

LED Indications

Table 10-1 PGD(2)-U( ) ADP LED Indications

LED Indication
LED 1 Green LED when
CH1 in use.
LED 2 Green LED when
CH2 in use.

Setting up PGD(2)-U( ) ADP Connections

If the PGD(2)-U( ) ADP is to be wall mounted, all the cable connections
should be made first.
For the module to ID correctly after setting the jumpers, set the circuit type
to 0 for the module port in Program 10-03-01 prior to connecting the line
cord to the PGD(2)-U( ) ADP.
1. Remove the screw from the front of the PGD(2)-U( ) ADP.

Figure 10-2 Remove Cover from PGD(2)-U( ) ADP

Channel 2
Status LED

Figure 10-1 PGD(2)-U( ) ADP

Flashing green LED indicates dipswitch setting
and programming for CH1 are conflicting.
Flashing green LED indicates dipswitch setting
and programming for CH2 are conflicting.
Installing SV8100/SV8300 Optional Equipment
UNIVERGE SV8100/SV8300
Note