UNIVERGE SV8100/SV8300
System Hardware Manual
7.
Connect the two-conductor station cable from the CN5 connectors in the
PGD(2)-U( ) ADP to the external relay/external page.
Figure 10-13 PGD(2)-U( ) ADP Cable Connection
he PGD(2)-U( ) ADP provides amplifiers for each
T
page output port (for a maximum of +8 dBM, 600
ohms at 1KHz). No additional page amplification is
provided by the PGD(2)-U( ) ADP but, if required, an
external page amplifier can be used for additional
amplification.
The page output of the CD-CP00-AU does not
provide amplification (for a maximum output of -3
dBm, 600 ohms at 1KHz). If the paging volume is not
satisfactory using the CN8 or CN9 connector on the
CD-CP00-AU, the PGD(2)-U( ) ADP should be used
instead.
Issue No. 1.5
10 - 15