Wall-Mounting The Slt Adapter; Figure 7-92 Removing The Cover; Figure 7-93 Attaching The Unit - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
7.2
System Hardware Manual

Wall-Mounting the SLT Adapter

1. Unplug the two line cords from the SLT Adapter.
2. Remove the two screws from the front of the SLT Adapter.
3. Lift the cover off the adapter.
4. Using the two screws provided with the SLT Adapter, attach the back
cover to the desired location.
5. Replace the front cover and the two screws removed in Step 2.
6. Plug the two modular line cords back into the SLT Adapter which were
removed in Step 1.

Figure 7-92 Removing the Cover

Figure 7-93 Attaching the Unit

Issue No. 1.5
7 - 69