UNIVERGE SV8100/SV8300
4.7
System Hardware Manual
2.
Locate the two grooves on the top of the telephone as illustrated in
7-29 Attaching Directory Card Holder to theMmultiline
directory card holder into the grooves on the multiline terminal until they
snap into place.
To remove the directory card, press the two sides of the directory card holder
inward until the tabs release and pull the holder out of the grooves.
Grooves
Figure 7-29 Attaching Directory Card Holder to theMmultiline Terminal
Installing a Numbered Keypad on the Multiline Terminal
The BS( )-L( ) Kits are keypad sets, which can be installed on a multiline
terminal replacing the Standard Numbered Keypad. The D
an optional keypad available to be used with the IPK II and IPS terminals.
Standard Numbered Keypad
The standard keypad (in black or white), is commonly delivered with the
UNIVERGE SV8100/SV8300 terminal (refer to
Numbered Keypad on page
Multiline Terminal
7-31).
Figure 7-30 Standard Numbered Keypad
Issue No. 1.5
Figure
Terminal. Push the
Directory Card
Holder
term
Series i Retro is
Figure 7-30 Standard
7 - 31