Surveying The Customer Site; Selecting The Best Location For Proper Installation; Selecting The Chassis Installation Site - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
2.2
2.3
5 - 2
Although it is recommended to install the blades with the system power
off, all blades can be installed hot, except for the following:
CC-CP00
PZ-BS10 and PZ-BS11
PZ-64IPLA and PZ-128IPLA
PZ-VM21

Surveying the Customer Site

In most cases, a survey of the customer site is necessary to determine the
proper placement of the Main Distribution Frame (MDF), the exact dimensions
of the area selected for the MDF, cabling requirements, and possible
Intermediate Distribution Frame (IDF) locations.
The information obtained at the customer site can permit the installer to partially
assemble the MDF before installation at the customer premise. This can reduce
the time spent installing at the customer site and reduce downtime.

Selecting the Best Location for Proper Installation

2.3.1

Selecting the Chassis Installation Site

When selecting an installation site for the chassis, consider the
following conditions to ensure proper installation:
The chassis should not be located directly beneath pipes. Leaks or
condensation could damage the SV8300 system equipment.
The area where the chassis is located must be free of corrosive
and inflammable gases, excessive chemical or industrial dusts,
and other materials that could cause a hazard to personnel or to
the proper functioning of the equipment.
The operating ambient temperature and humidity must be within
the limits specified in
in Chapter 3 System Specifications.
The operation of the system is virtually noiseless and allows wide
selection of installation sites. Take care to ensure the chassis
cabling
cabling costs, a centralized location must be chosen.
Locate the chassis at a site where a dedicated AC power source
can be easily accessed.
Connect the chassis to a dedicated AC receptacle that is not
being used for any other device.
6.3 Environmental Conditions on page 2-19
do not present a hazard to office traffic. To minimize
UNIVERGE SV8100/SV8300
Installing the SV8300 Chassis
or