Installation; Led Indications; Connectors; Table 6-19 Cd-8Dlca/Cd-16Dlca Led Indications - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
LED Indication
Live LED
Busy LED (Red)
(Green)
On On
Flash (1s) On
Flash (1s)
Flash On
(100ms)
Off
Off On
Off
Flash (80ms On/
Off) x 3/400ms
Off
6 - 44
4.1.2

Installation

The CD-8DLCA/CD-16DLCA blades can be installed in any universal
slot in the system and up to a maximum of 20 DLCA blades can be
installed per system, providing up to 320 digital ports.
To install the PZ-8DLCB
1. If installing the CD-8DLCA and the PZ-8DLCB daughter board is
to be attached, do it now. Refer to
page 6-46.
2. Each CNx01 connector (CN101, CN201, CN301, CN401) is
used to connect up to four digital extensions.
4.1.3

LED Indications

LEDs for the CD-8DLCA
CD-8DLCA/CD-16DLCA LED
associated function and LED and Operational status. Refer to
6-13 CD-8DLCA Blade
location of the LEDs on the blades.

Table 6-19 CD-8DLCA/CD-16DLCA LED Indications

Operation Status
System Initializing
The assignment of the unit is refused.
Trouble found during self-diagnostics.
Normal A Channel is busy (use
Operation
another from CH1 ~ CHx).
All channels are idle.
Unit Busy A Channel is busy (use
another from CH1 ~ CHx).
All channels are idle.
Downloading firmware.
4.1.4

Connectors

The CNx01 connectors provide connection to four digital station ports.
With the CD-16DLCA blade, the CN101, CN201, CN301, and CN401
connectors are available. With the CD-8DLCA blade the CN301 and
CN401connectors are removed from the blade.
UNIVERGE SV8100/SV8300
CD-16DLCA:
/
4.2.2 Installation on
CD-16DLCA are described in
/
Indications. Each LED is listed with its
and Figure 6-14 CD-16DLCA Blade
–
When you exceed the system
capacity.
When the main software version is
not matched.
–
–
–
–
–
–
Installing the SV8100/SV8300 Blades
Table 6-19
Figure
for the
Remarks