Psa-L( ) (Bk) Unit / Psa-L( ) (Wh) Unit - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
12.5
System Hardware Manual
11.
To determine the APR analog extension number
10-03-04 : Optional Installed Unit 1
Displays the type of terminal installed. This can be used to verify
that the system recognizes the adapter.
10-03-06 : Blade Setup
Assign the terminal type (12) for the telephone channel, which
has the APR Adapter installed.
When you want the APR to use the same extension number as
the telephone to which it is attached, remove the terminal type in
this option. With this setup, when the analog device is in use, it
busies out the terminal as there is no separate port number
assigned for the adapter. To reverse this, and allow the APR to
have its own extension number, reassign the terminal type (12)
in this option.
10-03-07 : Blade Setup
The port number of the APR Adapter is displayed for the
extension (APR ports = 193-256 with all software through 3.07).
The ports are assigned from the highest available port down.
PSA-L( ) (BK) UNIT
The PSA-L UNIT (Power Save Adapter), an optional adapter for the ITL/DTL
Terminals, is used with IP telephones to make or receive a call using the Public
Switched Telephone Network (PSTN) when a call cannot be made or received
using the Local Area Network (LAN). When a power failure occurs, the IP
telephone is automatically switched to the PSTN. When power is restored, the
IP telephone restarts and connects to the network unless a conversation is in
progress on PSTN. The PSTN call must be completed by going on-hook before
the connection to the LAN is restored. The unit features:
Survivability in case of power failure or network congestion
Support on modular terminals (ITL/DTL)
PSTN Type = analog PSTN
PSA-L( ) (WH) UNIT
/
Issue No. 1.5
10 - 67