Description - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
3.2.1

Description

The CC-CP00 blade is available only for the SV8300 system.
The CC-CP00 controls all the functions and operations of the SV8300
system using the system software loaded into the CC-CP00 memory.
The system software can be upgraded as new software becomes
available.
One CC-CP00 blade must be installed in the Controlling Chassis. A
second CPU can be installed in the first Expansion Chassis if
additional VoIP or voice mail resources are required. A second CCPU
can also be used for a CCPU redundancy feature (primary/secondary
CCPUs) as a backup in case of a hardware failure. (The CCPUs must
be programmed for primary/secondary operation.)
The CC-CP00 functions are:
Music on Hold tone Circuit, External Source Control Circuit
PZ-VM21 Interface Circuit
System Program and System Data Storing Memory Circuit
USB Interface Circuit
Ethernet Interface Circuit
PZ-BS10/PZ-BS11 Interface Circuit
Main Processing 32-Bit CPU Circuit (MPC8260 @ 266 MHz)
Time Switch, Optional Blade Control Circuit
Backboard Interface Circuit
The CC-CP00 provides:
512 trunk ports maximum
1290 extension ports maximum (standalone)
– 960 ports digital extension number
– 1024 ports IP extension number
– 1296 analog ports maximum
1500 extension ports maximum (Remote Unit)
– 1500 ports digital and IP extension number
– 1500 analog ports maximum
1000 virtual extensions
Connection for 64/128 VoIP Daughter Blade (PZ-64IPLA,
PZ-128IPLA)
Connection for Modem Daughter blade (PZ-VM21)
One Blue Status LED
Three Green Status LEDs
Two Red Status LEDs
Issue No. 1.5
6 - 23