Figure 4-73 Removing Battery Tray Suppressor - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
4 - 52
2. Remove two screws from front of Battery Tray Suppressor.
Refer to Figure 4-73 Removing Battery Tray

Figure 4-73 Removing Battery Tray Suppressor

3. Slide Battery Tray Suppressor outward to remove.
4. Disconnect the Battery Connection Cables from the Fuse Unit.
Refer to Figure 4-74 Disconnecting Battery Cables on page
4-52.
Figure 4-74 Disconnecting Battery Cables
5. Loosen two screws and pull Fuse Unit out of the CHS LARGE
BATT BOX.
6. See Figure 4-75 CHS LARGE BATT BOX Fuse Unit
replacement of 8A or 30A fuses.
UNIVERGE SV8100/SV8300
Suppressor.
for
Installing the SV8100 Chassis