Installing The Base Plate; Figure 11-26 Removing Base Plate; Figure 11-27 Installing Base Plate - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
10.2
W
S 11
ALL
ECTION
You can wall mount a DTH/DTR connection multiline terminal (except for DTR-2D-1( )
TEL) using the base cover or an optional wall mount unit. A wall mount unit must be
used if adapters are installed on the multiline terminal.
11 - 16
2. Press the tabs as illustrated in
slide the base cover in the direction of the arrows until it clicks.

Installing the Base Plate

1. Line up the four tabs on the extended base cover with corresponding slots
on the multiline terminal as illustrated in
Plate.
2. Slide the cover in the direction of the arrows until it clicks in place.
M M
OUNTING ULTILINE
Figure 11-26 Removing Base

Figure 11-26 Removing Base Plate

Figure 11-27 Installing Base

Figure 11-27 Installing Base Plate

T
ERMINALS
Installing D
UNIVERGE SV8100/SV8300
Plate, and
term
Series i Telephones