Figure 12-10 Removing Ad(A)-R( ) Unit Cover; Figure 12-11 Attaching Cables To The Ad(A)-R( ) Unit - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
12 - 6
To connect the cables:
1. Cut off the plug on one end of the cable.
2. Remove the screw as illustrated in
AD(A)-R( ) Unit Cover on page 12-6
Remove Screw

Figure 12-10 Removing AD(A)-R( ) Unit Cover

3. Locate the adapter terminals on the unit.
4. Remove the cap on the adapter terminal to expose the metal
receptacle. Push the cable in the applicable receptacle, and
replace the cap. Line up the slot on the cap with the slot on the
metal receptacle to ensure proper contact. Refer to
Attaching Cables to the AD(A)-R( )
Attach the cables to the AD(A)-R( ) Unit according to
AD(A)-R( ) Unit Cable Connections on page

Figure 12-11 Attaching Cables to the AD(A)-R( ) Unit

UNIVERGE SV8100/SV8300
Figure 12-10 Removing
and open the unit cover.
Unit.
term
Installing D Series i Optional Equipment
Figure 12-11
Table 12-1
12-7.