Programming; Figure 10-15 Pgd(2)-U( ) Adp Cable Connection - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
7.3
System Hardware Manual

Figure 10-15 PGD(2)-U( ) ADP Cable Connection

Programming

10-03-01 : ETU Setup – Terminal Type (Circuit 1)
10-03-06 : ETU Setup – Terminal Type (Circuit 2)
Confirm that the PGD(2)-U( ) ADP has defined the circuit type as either
type 7 for External Ringer or 9 for ACIs. (If the PGD(2)-U( ) ADP circuit
had previously been defined for another type of circuit, unplug the
PGD(2)-U( ) ADP and plug it back in to reset the circuit type.)
10-05-01 : General Purpose Relay Setup
Define which relay circuits (5-8) on the PGD(2)-U( ) ADP are used for
General Purpose Relays.
11-06-01 : ACI Extension Numbering
Assign extension numbers to ACI software ports. Select a number outside
of the normal extension number range.
Aspire S: ACI Ports 1-8
Aspire: ACI Ports 1-96
11-08-01 : ACI Group Pilot Number
Assign pilot numbers to ACI groups. When a user dials the pilot number,
they reach an available ACI software port in the group.
Aspire S: ACI Groups 1-4
Aspire: ACI Groups 1-16
Issue No. 1.5
10 - 19