Issue No. 1.5
8 - 12
2.
Remove the Bluetooth hanger from the cradle.
With a screwdriver, pry from the bottom, and lift the handset hanger from
the cradle.
3.
Rotate the hanger top to bottom. Slide it downward in the hollow
until it clicks into position.
Figure 8-15 Change Handset Hanger
4.
Turn multiline terminal upside down.
5.
Lower the tilt leg to the first position (refer to
Tilt Leg from Leg
Tilt Leg
Figure 8-16 Separate Tilt Leg from Leg Support
Installing SV8100/SV8300 Cordless Telephones
UNIVERGE SV8100/SV8300
Support).
Figure 8-3 Separate
Stoppers