Table 6-47 Mdf Cable Connections (Station); Table 6-48 Mdf Cable Connections (Trunk) - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
7.3.2 Outside Lines
The connection of CO lines is an RJ-61. The lines are connected in
sequence in this termination block. Therefore, the lines must be
ordered in the appearance order best suited to the user. Refer to
6-47 MDF Cable Connections (Station) on page 6-98
MDF Cable Connections (Trunk) on page 6-99
the MDF Connector Assembly Cable positions, the cable number, and
lead functions.
Loop Start, OPX, E&M Tie lines, and E1 can be connected to this
system. Using only twisted-pair wiring to cross connect the lines from
the RJ-61 termination block to the MDF is recommended.
Issue No. 1.5
Table
or Table 6-48
for information about
6 - 101