Figure 7-57 Ribbon Cable Installed; Figure 7-58 8Lkd (Ld)-L Unit Installed - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
8. Press down on the black bar to lock the cable into
place (refer to Figure 7-57 Ribbon Cable Installed on
page 7-49).

Figure 7-57 Ribbon Cable Installed

9. Align the projections on the bottom of the 8LKD
(LD)-L UNIT into the guide holes on top of the
multiline terminal.
10. Slide the 8LKD (LD)-L UNIT toward the keypad
buttons until snug (refer to
UNIT Installed).

Figure 7-58 8LKD (LD)-L UNIT Installed

11. Holding the LCD in place, turn the multiline terminal
button side down.
Issue No. 1.5
Guide
Projection
Guide
(One Each Side)
Figure 7-58 8LKD (LD)-L
7 - 49