Multiline Terminal Led Flash Patterns; Table 3-19 Multiline Terminal Led Flash Pattern - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
LED
I-Use
Busy
Incoming Call
I-Hold
Line Key Call Hold
Hold Recall
Transfer Recall
Live Monitoring Mode
Message Waiting on Line Key
Microphone ON
ON (Series i)
Mic
I-Use
ICM Incoming Call
ICM
Voice Over Broker
Incoming Internal Call
Incoming Outside Call
Large LED
Message from Attendant
Voice Mail Message
ON
Speaker
System Data Entry
Conference in Progress/Barge In
All Conference Circuits Used
Conf Hold Conference Call
ICM Call Hold
SPD Confirmation
Incoming Trunk
Exclusive Hold
Answer
User Ringing Line Preference
Voice Over with Broker's Call
Callback Set
Auto Repeat Set
Feature
ON (to set function)
Call FWD - All Calls Set
Use, Hold
DND, Call FWD-All Calls Set
BLF or
DSS Key
Special Mode (while pressing
Feature or going off-line)
System Hardware Manual
6.9.3

Multiline Terminal LED Flash Patterns

The SV8300 system has 2-color LEDs. Green is used primarily for
I-Use conditions and for outside calls. Red is used primarily for Other
Use conditions and internal calls. Refer to
Terminal LED Flash

Table 3-19 Multiline Terminal LED Flash Pattern

Condition
Pattern.
Color
Green
Red
Red
Green
Red
Green
Green
Green
Red
Red
Red
Red
Red
Red
Red
Green
Green
Red
Red
Red
Red
Red
Red
Red
Red
Red
Green
Red
Green
Red
Red
Red
Red
Red
Red
Red
0 0.5
Issue No. 1.5
Table 3-19 Multiline
Flash Patterns
1.0 1.5 2.0 sec.
3 - 29