Figure 7-64 8Lki (Ld)-L Unit Installed; Figure 7-65 Install Screw - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
9. Align the projections on the bottom of the 8LKI (LD)-L
UNIT into the guide holes on top of the multiline
terminal (refer to
10. Slide the 8LKI (LD)-L UNIT toward the keypad
buttons until snug (refer to
UNIT Installed).

Figure 7-64 8LKI (LD)-L UNIT Installed

11. Holding the LCD in place, turn the multiline terminal
button side down.
12. Install screw (refer to
Side Panel

Figure 7-65 Install Screw

13. Attach the side panel to the side of the 8LKI (LD)-L
UNIT (refer to Figure 7-65 Install
14. Return the multiline terminal to the buttons side up
position.
15. Connect the line cord/LAN cable and the AC/DC
adapter to the ITL multiline terminal.
Figure 7-63 Ribbon Cable
Figure 7-64 8LKI (LD)-L
Figure 7-65 Install
Screw).
Issue No. 1.5
Installed).
Screw).
Screw
7 - 53