Installing Expansion Blades In The 19" Chassis (Optional); Figure 4-26 Installing The Cd-Cp00-Au Blade; Figure 4-27 Cd-Cp00-Au Blade Installed - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
2. Align the CD-CP00-AU blade with the Slot 1 guides of the
Controlling Chassis.
Figure 4-25 19" Controlling Chassis – Guides Slot 1
3. Slide the CD-CP00-AU blade into the chassis until resistance
(back plane) is felt.

Figure 4-26 Installing the CD-CP00-AU Blade

4. Gently push until the blade seats. Tighten the two retaining
screws on front of the blade.

Figure 4-27 CD-CP00-AU Blade Installed

3.5.4

Installing Expansion Blades in the 19" Chassis (Optional)

When adding additional chassis to the system to expand the capacity,
a PZ-BS10 must be installed in the Controlling Chassis and a
PZ-BS11 must be installed in all Expansion Chassis. This connection
is required with any multiple-chassis setup.
Issue No. 1.5
4 - 25