UNIVERGE SV8100/SV8300
System Hardware Manual
6.
Secure the chassis to the CHS BASE UNIT using eight screws
supplied with the CHS2U JOINT BRACKET KIT.
7.
Connect the ground wire to all chassis. Refer to
Chassis Grounding on page 4-34
grounding the system.
8.
Refer to
installation of the chassis or, Chapter 5 paragraph
an Extension or Trunk Blade on page 6-3
blades.
3.2.2
Multiple CHS2U-AU Chassis Installation
Expansion chassis can be secured to the CHS BASE UNIT and will
require an additional CHS2U JOINT BRACKET KIT per chassis.
1.
Install the five rubber feet to the bottom of each chassis.
Figure 4-13 Install CHS2U JOINT BRACKET KIT
3.5 Installing the 19" Chassis on page 4-24
Figure 4-14 Install Rubber Feet
Issue No. 1.5
3.5.5 Install 19"
for complete details on
to continue
2.2 Installing
for installation of
4 - 15