Figure 10-56 Bottom Option Interface Knockout; Figure 10-57 Install Apr-L( ) Unit; Figure 10-58 Ferrite Bead With Apr Adapter - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
10 - 66
6. Carefully pry loose the knockout covering the bottom option
interface (refer to
Knockout on page
Knockout

Figure 10-56 Bottom Option Interface Knockout

7. Using the exposed Bottom Option Interface as a guide, install
the APR-L( ) UNIT in the bottom of the DTL multiline terminal.
Push down until left and right tabs are seated (Refer to
10-57 Install APR-L( )
Tab
Bottom Option
Interface
8. Return tilt leg to original position.
9. For the APR adapter to be recognized correctly, before plugging
in the multiline terminal, make sure the extension number to be
used for the adapter is undefined in Program 10-03-01.
10. Plug the line cord back into the multiline terminal.

Figure 10-58 Ferrite Bead with APR Adapter

Before removing the adapter, to avoid any
hardware problems, unplug the line cord, then
any other adapter cables.
UNIVERGE SV8100/SV8300
Figure 10-56 Bottom Option Interface
10-66).
UNIT).

Figure 10-57 Install APR-L( ) UNIT

Installing SV8100/SV8300 Optional Equipment
Bottom Option
Interface
Figure
Tab