UNIVERGE SV8100/SV8300
S
S
7
INGLE
ECTION
7.1
System Hardware Manual
6.3.3
Wall Mounting
The UTR-1-1( ) USB handset can be mounted on the wall using a wall
plate or two screws. Align the two holes on the back of the UTR-1-1( )
and slide down onto the wall plate or screws.
Figure 7-89 Wall Mounting the UTR-1-1( ) USB Handset
Because of strength variation in swall plates, this method is not
recommended.
L
T
INE
ELEPHONE
Installing the SLT Adapter
The Single Line Telephone adapter provides an interface for Single Line
Telephones and other similar devices from an ESI channel.
This adapter can be connected to any ESI port.
1.
Connect one end of the RJ-11 to the ESI port on the chassis and one end
to the ESI jack on the SLT Adapter.
Issue No. 1.5
7 - 67