Download Print this page

NEC Univerge SV8100 Reference Sheet

12/24/32 button digital & ip desi less 8 button digital & ip
Hide thumbs

Advertisement

FUNCTION KEYS
OVERVIEW
Cursor
Recall
Press this key to send a hook flash to the CO you are
currently on. Depending on the CO it may put the
caller on hold with Telco or hang up.
Feature
Used to active terminal setup functions and to
program One-Touch keys.
Feature + 1 turns microphone On/Off
Answer
When the LED on this key is flashing press the key
to answer a waiting call
Hold
Press this key to put a caller on hold
Transfer
Menu
Allows the extension user to transfer a call or make
From this key, the user may access
a 2nd call
additional functions such as Call History
Speaker
and Directory
Controls built-in speaker, which can be used for
hands free dialing/monitoring. LED on key lights
when key is active.
Help
Explanations of Programmable Keys can be called
up on the LCD by pressing and holding the Help key
plus a programmable key.
Soft Keys
Exit
The user can exit from the Menu or Help mode by
Any feature sown at the bottom of the
pressing this key.
LCD is available. The appropriate feature
key is displayed on the screen according
to the call handling process.
MAKE A CALL
Programmable Keys
Lift the Handset or press Speaker
Dial the required number. For external calls dial 9 first
These keys can be programmed as ei-
ther a Flexible Line key, Programmable
Feature key or One-Touch Speed Dial
key.
LAST NUMBER REDIAL
CONFERENCE
With a call in progress
Without lifting handset, press the REDIAL button.
Press the Conf key/softkey
Press the Up or Down softkeys to scroll through the
recent call list.
Dial internal or 9 + external number
Lift the handset or press the speaker button to dial
When the third party answers press the RLS
key to remove them should they not wish to
HOLD
be part of the conference. Then dial your
Press the Hold key– held key flashes.
next participants number.
You may replace the handset in the cradle
Press Add and dial any additional participants.
To Retrieve:
Once you have everyone you wish joined to
the conference press Begin
Lift handset
Note: Any party may exit the conference by
Press flashing line
hanging up. The other 2 parties will stay
Note: For exclusive hold– press Feature + Hold
connected as long as one of them is internal.
TRANSFER
VOICECALL
With a call in progress:
Allows user to intercom to other handsets.
Press the Transfer key
Lift the handset and dial extension number
Dial the extension or outside number
Press the Voice soft key and speak over the
intercom
Replace the handset
Note: If the called extension is busy or does not answer
press the Flashing Key to return to your caller

Advertisement

loading

  Summary of Contents for NEC Univerge SV8100

  • Page 1 OVERVIEW FUNCTION KEYS Cursor Recall Press this key to send a hook flash to the CO you are currently on. Depending on the CO it may put the caller on hold with Telco or hang up. Feature Used to active terminal setup functions and to LAST NUMBER REDIAL CONFERENCE program One-Touch keys.
  • Page 2 PROGRAMMING SPEED NUMBERS ANSWER A SECOND CALL CALL FORWARD ALL To store a station speed dial number (display phones Forwards all calls immediately. Answer Hold allows a multiline terminal user to press only) the flashing Answer Key to answer an incoming ringing To Set: call.