Figure 7-71 Serial Cable Installed - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
11. Connect the cable from the DCL-60-1 CONSOLE to
the Side Option Connector on the multiline terminal
and close the cover (ITL, DT700 only).

Figure 7-71 Serial Cable Installed

12. Set the height of the tilt leg on the multiline terminal to
the desired height.
13. Set the height of the tilt leg on the DCL-60-1
CONSOLE to match the tilt leg on the multiline
terminal.
14. Attach the side panel to the side of the DCL-60-1
CONSOLE.
15. Return the multiline terminal and DCL-60-1
CONSOLE to the buttons side up position.
16. Connect the digital cable to the LINE jack (DT300
Series).
Issue No. 1.5
7 - 57