Removing The Multiline Terminal From The Wall Mounted Plate; Figure 7-83 Mount Multiline Terminal Wall On Wall Plate; Figure 7-84 Removing The Multiline Terminal - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
7 - 64
6.
7.
5.2.10

Removing the Multiline Terminal from the Wall Mounted Plate.

To remove the multiline terminal, push up on the telephone until it
comes loose.
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Align the two holes on the back of the WM-L( ) UNIT
with the two screws on the wall plate and slide
downward (refer to Figure 7-83 Mount Multiline
Terminal Wall on Wall

Figure 7-83 Mount Multiline Terminal Wall on Wall Plate

Because of strength variation in wall plates, this method is
not recommended.
Push excess line cord behind the multiline terminal.

Figure 7-84 Removing the Multiline Terminal

UNIVERGE SV8100/SV8300
Plate).