Figure 5-45 Pz-Bs10 Blade Installed; Figure 5-46 Pz-Bs10 Installed (Cover Closed); Figure 5-47 Pz-Bs11 Expansion Bay In Expansion Chassis - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
8. Align the door with the hinge and reattach the door.
9. Close the PZ-BS10 cover.

Figure 5-46 PZ-BS10 Installed (Cover Closed)

3.5.5.3 Install the PZ-BS11 Expansion Blade in the CHS2U-AU
Expansion Chassis
For the Expansion Chassis to function, the PZ-BS10 blade must be
installed in Controlling Chassis.
Do not remove or install this blade with
the power on.
1. Ensure the chassis is powered down.
2. Locate the door positioned on the left end (expansion
bay) of the Expansion Chassis.
Figure 5-47 PZ-BS11 Expansion Bay in Expansion
Screw

Figure 5-45 PZ-BS10 Blade Installed

Expansion Bay
Chassis
Issue No. 1.5
Hinge
5 - 39