Figure 12-26 Attaching The Ct(U)-R( ) Unit To The Multiline Terminal - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
12 - 20
2. Plug the tabs marked A and B into adapter slots, then snap the
tab on the other end of the adapter into the receptacle marked C.
Refer to Figure 12-26 Attaching the CT(U)-R( ) Unit to the
Multiline Terminal on page

Figure 12-26 Attaching the CT(U)-R( ) Unit to the Multiline Terminal

3. Replace the base plate (or wall mount unit) and attach the line
cord. Refer to Section 3 Connecting a Multiline Terminal to the
System on page
4. Attach the AC-2R/AC-3R to the CT(U)-R( ) Unit. Refer to
12-5 Connecting the AC Adapter to an Installed Adapter on page
12-4.
UNIVERGE SV8100/SV8300
12-20.
11-8.
term
Installing D Series i Optional Equipment
Figure