Figure 5-25 Chs2U-Au/Chs1U-Au Chassis Stand Mount - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
7. Align screw holes in floor mount bracket with pre-drilled holes in
floor.
8. Using supplied screws, secure the CHS STAND KIT (K) to the
floor. Refer to Figure 5-25 CHS2U-AU/CHS1U-AU Chassis
Stand Mount on page
To prevent damage to the 19" chassis due to
falling, install the chassis with stand mount
brackets.

Figure 5-25 CHS2U-AU/CHS1U-AU Chassis Stand Mount

9. Connect the ground wire to all chassis. Refer to
Chassis Grounding on page 5-45
grounding the system.
10. Refer to 3.5 Installing the 19" Chassis on page 5-33
installation of the chassis or, Chapter 5 paragraph 2.2 Installing
an Extension or Trunk Blade on page 6-4 for installation of
blades.
5-23.
for complete details on
Issue No. 1.5
3.5.7 Install 19"
to continue
5 - 23