UNIVERGE SV8100/SV8300
System Hardware Manual
3.
Lower the tilt leg to the first position (refer to
Separate Tilt Leg from Leg
Tilt Leg
Figure 8-20 Separate Tilt Leg from Leg Support
4.
Remove the connector cover (rubber) from the bottom of the
multiline terminal (see
Cover on page
8-15).
Figure 8-21 Removing the Connector Cover
Support).
Figure 8-21 Removing the Connector
Issue No. 1.5
Figure 8-20
Stoppers
8 - 15