Installing An Hf-R( ) Unit On Any Dtr/Dth Multiline Terminal (Except Dtr-2Dt-1( )); Figure 12-28 Attaching The Hf-R( ) Unit To The Multiline Terminal - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
12 - 22
4.1.1 Installing an HF-R( ) Unit on any DTR/DTH Multiline Terminal (except
DTR-2DT-1( ))
1. With terminal upside down, facing from the bottom of the open
cover, install this unit in terminal adapter Slot 1.

Figure 12-28 Attaching the HF-R( ) Unit to the Multiline Terminal

2. Plug the tabs marked A and B into adapter slots, then snap the
tab on the other end of the adapter into the receptacle marked C.
Refer to
Terminal.
3. Replace the base plate (or wall mount unit) and attach the line
cord. Refer to
System on page
Figure 12-28 Attaching the HF-R( ) Unit to the Multiline
Section 3 Connecting a Multiline Terminal to the
11-8.
Installing D
UNIVERGE SV8100/SV8300
term
Series i Optional Equipment