Figure 10-64 Attach Psa-L( ) Unit To The Multiline Terminal; Figure 10-65 Grooved Cutout For Serial Cable - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
9. Fit the projections on the side of the PSA-L UNIT into the guide
holes on the side of the terminal and pull toward you until the
PSA-L UNIT snaps into place.

Figure 10-64 Attach PSA-L( ) Unit to the Multiline Terminal

10. Gently press the serial cable into the grooved cutout for the
cable.

Figure 10-65 Grooved Cutout for Serial Cable

11. Connect the serial connection cord (refer to
PSA-L( ) Unit to the Multiline Terminal on page
PSA-L UNIT to the terminal body.
12. Open the Dip Switch Cover (refer to
Connections on page
adapter to the required position. Close the cover.
Cable Groove
Figure 10-60 PSA-L UNIT
10-68). Set the dip switch on the PSA-L( )
Issue No. 1.5
Figure 10-64 Attach
10-71) from the
10 - 71