Outside Line Types; Transmission, Network, And Control Specifications; Transmission - NEC UNIVERGE SV8100 System Hardware Manual

Issue No. 1.5
6.4
6.5
2 - 20
Door Box
Operating Temperature: -4°F ~ +104
Operating Humidity: 20 ~ 80% (non-condensing)
SV8100 Power Supply – MPS7101
Operating Temperature: +32°F ~ +104°F (0
Recommended Long Term Temperature: -4
o
(-40 C ~ 75
Operating Humidity: 20 ~ 95% RH (non-condensing)
Recommended Long Term Humidity: 10 ~ 95% RH

Outside Line Types

The following outside lines can be used with the UNIVERGE SV8100/SV8300
system.
2-wire, Loop Start or Ground Start Trunks
2-wire, 2-way DID Lines (Dial Pulse or DTMF)
DID feature is not available for Europe and Australia market.
4-wire, E&M Tie Lines (Type I or V, Dial Pulse, or DTMF)
Digital Trunk T1/FT1 (Loop Start, Ground Start, Tie Line (E&M), or DID
Signaling)
ISDN-BRI Trunks
ISDN-PRI Trunks
VoIP Trunk (Internet Protocol)

Transmission, Network, and Control Specifications

6.5.1

Transmission

Data Length:
From multiline terminal to CD-8DLCA: 23 bits
From CD-8DLCA to multiline terminal: 23 bits
Data Transmission Rates:
Between CD-8DLCA and multiline terminal: 184K bps (voice and
signaling)
Scanning Time for each multiline terminal: 32 ms.
o
C)
UNIVERGE SV8100/SV8300
o o o
F (-20 C ~ 60 C
o o
C ~ +40 C)
°
o
F ~ 167 F
SV8100 System Specifications