Issue No. 1.5
4 - 16
2.
Using supplied screws in the CHS2U JOINT BRACKET KIT,
attach metal brackets to both ends of the 19" chassis and the
CHS BASE UNIT. Refer to
with
Screws.
Figure 4-15 Install Metal Brackets with Screws
3.
Connect the ground wire to all chassis. Refer to
Chassis Grounding on page 4-34
grounding the system.
4.
Refer to
3.5 Installing the 19" Chassis on page 4-24
installation of the chassis or, Chapter 5 paragraph
an Extension or Trunk Blade on page 6-3
blades.
UNIVERGE SV8100/SV8300
Figure 4-15 Install Metal Brackets
3.5.5 Install 19"
for complete details on
for installation of
Installing the SV8100 Chassis
Metal
Brackets
to continue
2.2 Installing