Appendix A Interface Board (Ie-70000-Pci-If-A) For Desktop Pc; Introduction - NEC 78K/0 Series User Manual

APPENDIX A INTERFACE BOARD (IE-70000-PCI-IF-A) FOR DESKTOP PC

This chapter describes the setting method when connecting the IE-78K0-NS.
For details, refer to the IE-70000-PCI-IF-A User's Manual (to be prepared).
A.1 Introduction
The IE-70000-PCI-IF-A is an interface board for an IE product that is installed in the PCI bus slot of a PC.
First of all, check that you have the following items.
• Interface board (IE-70000-PCI-IF-A) for desktop PC × 1
• 8-bit connector board (connected to IE-70000-PCI-IF-A) × 1
• 32-bit connector board × 1
• User's manual × 1
• DLL-DISK × 1
• DRV-DISK × 1
<Basic specifications>
Hardware resources used
• I/O address .........0000H to FFFFH
• Interrupts ............Unused
• Memory...............Uses 80 bytes
Current consumption
300 mA (MAX. when using +5 V)
Cautions 1. Do not place heavy objects on or apply pressure to the board.
2. Do not drop the board or subject it to excessive vibration or shock.
3. When removing a cable, do not pull it by the cord.
4. Do not use or keep the board in a hot, humid or dusty environment or in a location where it
is directly exposed to sunlight.
5. Avoid subjecting the board to extreme changes in temperature or humidity.
6. Do not spill drinks or other liquids onto the board or its accessories.
7. Do not connect a cable for a different product to the connector.
36
User's Manual U13731EJ3V0UM