Setting Measurement Conditions - Hioki MEMORY HiLOGGER LR8450 Instruction Manual

Setting Measurement Conditions

1.3 Setting Measurement Conditions

This section describes how to configure settings such as the recording interval and recording time.
Settings cannot be changed while measurement is in progress. Stop measurement and then
change the settings.
You can select the recording method.
Continuous recording
Time-specified recording
Repeat recording
Find Quality Products Online at:
Sets the recording time setting to [Continuous].
Recording will continue until you press the
be stopped with a trigger.
See "Stop triggers" (p. 1 16).
Sets the recording time setting to
The setting indicates the amount of time for which to record (the
recording length). Recording will stop once the set time has elapsed.
Recording can be stopped before the set time elapses with the
key or a trigger.
Sets the repeat recording setting to [ON].
Recording will resume after stopping (due to stop trigger conditions or
the completion of recording for the set recording time). Recording will
repeat until you press the
[OFF], recording will stop after one iteration.
GlobalTestSupply
www.
STOP key. Recording can
[Specified time].
STOP key. If the repeat recording setting is
.com
sales@GlobalTestSupply.com
STOP