9.5 Performing Remote Operation Using the HTTP
Server
This section describes how to use the instrument's HTTP server function to control it remotely using
a computer.
You can configure the instrument's settings, acquire measurement data, and monitor the display
through a commonly used web browser, including Internet Explorer
To perform remote measurement using the HTTP server function, you must configure LAN settings
and use a LAN connection.
When accessing the HTTP server, the communication command setting header will be set to OFF.
You cannot perform the remote operation through the HTTP server during measurement using the
Logger Utility or programs, including those created with Visual Basic®.
Some browsers may be unable to connect to the HTTP server if the FTP/HTTP authentication
setting is enabled. In this case, either use a different browser or disable the FTP/HTTP
authentication setting.
After updating the instrument's firmware, the remote operation function may open the page from the
previous version or otherwise fail to function properly. In this case, delete your browser's cache and
connect again.
If you attempt to set the time during HTTP-server-communications, the communications may be
disrupted.
Connecting to the HTTP server
This section describes how to connect to the HTTP server using a computer.
2
2
4 4
1
Launch Internet Explorer
2
Enter the instrument's address into the address bar (for example,
3
(When the instrument's
Enter the username and password to log in.
Set a username and password to prevent inadvertent operation of the HTTP function by other
users.
If you plan to access the instrument frequently from multiple computers, set the
authentication settings]
See "FTP server connection limitations (FTP authentication)" (p. 2 63).
It is recommended to use Internet Explorer
Set the security level to
Find Quality Products Online at:
on the computer.
®
[FTP/HTTP authentication settings]
setting to [OFF].
®
11 or later.
[Medium]
or [Medium-high].
GlobalTestSupply
www.
®
.
setting is [ON])
[FTP/HTTP
.com
sales@GlobalTestSupply.com
).
Need help?
Do you have a question about the MEMORY HiLOGGER LR8450 and is the answer not in the manual?