Controlling The System; Setting The Time - Hioki MEMORY HiLOGGER LR8450 Instruction Manual

Controlling the System

7.2 Controlling the System

This section describes how to set the time and initialize (reset) the instrument.
It also describes how to perform a self-check.

Setting the time

The instrument has a calendar with automatic leap year detection as well as a 24-hour clock.
The clock is displayed in YYYY-MM-DD HH:MM:SS format at the bottom right of the screen. Set the
time if the displayed time diverges from the actual time.
The time is used when starting measurement (start trigger time) and in file information.
>
1
Press the
The settings window will open.
2
Configure the year, month, day, hour, minute, and second settings.
3
Select [Time
Default setting:
4
Press the
The time will be updated to reflect the new settings.
Press the
Find Quality Products Online at:
>
2 2
3 3
ENTER key while [Clock settings...]
zone], and then press the
[GMT+9]
ENTER key while [OK] is selected.
ENTER [Cancel]
key while
GlobalTestSupply
www.
1 1
4 4
is selected.
ENTER key.
is selected to close the window without changing the time.
.com
sales@GlobalTestSupply.com