Initializing (Resetting) The System - Hioki MEMORY HiLOGGER LR8450 Instruction Manual

Controlling the System

Initializing (resetting) the system

This section describes how to reset all settings to their factory defaults.
See "11.10 Settings after Initialization (System Reset)" (p. 3 96).
>
1
Press the
The settings window will open.
2
Select the check boxes for the settings you wish to initialize.
Settings data
Wireless unit information
Waveform data
Communication
3
Press the
The settings will be initialized.
Press the
settings.
Find Quality Products Online at:
>
2 2
ENTER key while [Initialize...]
Resets all non-LAN settings to their default values.
Deletes the wireless module information registered in the instrument.
(LR8450-01 only)
Deletes waveform data.
Resets LAN settings to their default values.
ENTER key while [OK] is selected.
ENTER key while [Cancel]
If resetting the wireless module registration information and the communications settings, you
need to register the wireless modules and configure the LAN setting again.
Ordinarily, it is not recommended to initialize them.
GlobalTestSupply
www.
1 1
3 3
is selected.
is selected to close the window without initializing any
.com
sales@GlobalTestSupply.com