Hioki MEMORY HiLOGGER LR8450 Instruction Manual page 257

Configuring and Establishing a Wireless LAN Connection (LR8450-01 Only)
When setting
1
Under [SSID], set an identification name for an access point.
The SSID is initially set to the string
number of the instrument). You can change to any SSID.
2
Under [Security], select an encryption protocol.
OFF
WPA-PSK (TKIP)
WPA2-PSK (AES)
3
When encryption is enabled, set a password to connect to the access point.
The default password is [password]. Change to any password with at least eight characters.
4
Under [Channel], set the frequency band channel for use in the wireless LAN.
1ch
 to
When using multiple pieces of LR8450-01, make sure that they are not using the same channel.
5
Press the
selected.
The communications environment around the instrument will be displayed.
The instrument will indicate the communications congestion level with colors (green, yellow, red).
6
Under [Stealth], select whether other terminal devices can search for the instrument.
Off , On

7
Set the IP address, subnet mask, and DHCP server.
See "Configuring LAN settings" (p. 2 45).
[Connected units]
The
instrument.
Find Quality Products Online at:
[Mode] to [Access point]
1 1
2 2
3 3
4 4
5 5
6 6
Does not encrypt data.
Encrypts data with WPA.

Encrypts data using WPA2.
11ch
ENTER key while [Execute]
box shows the number of the stations presently connected to the
GlobalTestSupply
www.
7 7
[LR8450#xxxxxxxx] (the letters xxxxxxxx represent the serial
under [Inspecting communication environment]
.com
sales@GlobalTestSupply.com
is