Sending Data Using The Ftp Client - Hioki MEMORY HiLOGGER LR8450 Instruction Manual

9.7 Sending Data Using the FTP Client

This section describes how to send files saved automatically on instrument media (SD Memory
Card and USB Drive) to an FTP server on a computer.
To do so, specify the IP address of a computer on which an FTP server is running.
You will need to register the instrument's username and password with the FTP server. For more
information, see the Windows
You can use the Windows
Apart from the Windows
• Set
• To send data at a regular interval, set the segmentation method to
auto saving
• To continue sending data even if the SD Memory Card runs out of space, set the processing
method to use when the media runs out of space to
See "Auto save (real-time save)" (p. 1 42).
1
Configure the LAN settings and establish a LAN connection. (p. 2 39)
2
Configure the FTP server on the computer. (p. 2 66)
3
Enable automatic sending of files via FTP on the instrument. (p. 2 80)
4
Configure auto saving on the instrument. (p. 1 42)
5
Start measurement on the instrument.
When data is automatically saved by the instrument, the file will be automatically sent to the
computer's FTP server.
6
Check the communications. (p. 2 83)
Find Quality Products Online at:
®
FTP server's help file.
®
FTP server or another server.
®
FTP server, you can use shareware such as FileZilla Server.
[Measure] [Auto save]
>
[File splitting] setting.
GlobalTestSupply
www.
[Waveform] [Format]
> >
[ON]

Sending Data Using the FTP Client

to any setting other than "OFF."
[Enable] [Timed]
or
under [Deleting].
.com
sales@GlobalTestSupply.com
under the