Saving Settings To The Instrument's Internal Backup Memory - Hioki MEMORY HiLOGGER LR8450 Instruction Manual

Saving settings to the instrument's internal backup memory

This section describes how to save settings conditions to the instrument's internal backup memory.
This functionality is convenient when no storage media (SD Memory Card or USB Drive) is
available.
Up to five groups of settings (labeled No. 1 to No. 5) can be stored in the backup memory.
The settings can be loaded automatically when the instrument is powered on. However, settings
cannot be loaded in the following circumstances:
• When the start state retention function is enabled
• When the startup auto-function is enabled
• When the setting you attempt to load contains the wireless module configuration different from
the one at the time of the shutdown.
>
1
Under
memory when the instrument is powered on.
OFF
No. 1
Select
This function takes priority over settings loaded from the SD Memory Card or USB Drive by the auto setup
function (p. 1 59).
[Auto setup]
If
will be loaded from the SD Memory Card or USB Drive.
Find Quality Products Online at:
>
1 1
2 2
[Auto setup], select whether to load settings conditions from the internal backup
Do not load settings automatically.
to No. 5 Load the settings conditions with the specified group number.
A dialog box asking the user to select a group (No. 1 to No. 5) will be displayed.
is [OFF], or if no data has been saved in the internal backup memory, the file
GlobalTestSupply
www.
1 1 2 2
Saving Data
3 3 4 4
[STARTUP.SET]
.com
sales@GlobalTestSupply.com