Performing Remote Operation Using the HTTP Server
Remote control using a browser
This section describes how to display the instrument's screen in a browser.
You can control the instrument remotely by clicking keys shown in the browser. However, power
key operation and attempts to engage the key lock (pressing and holding the
The mouse connected to the instrument cannot be used while it is being controlled remotely. By
holding down the control key and clicking the right button, you can perform the same operation as a
right click when a mouse is connected to the instrument.
2 2
3
3
1
Launch Internet Explorer
2
Enter the instrument's address into the address bar (for example,
3
Click
[REMOTE
The instrument screen will be displayed. The keys provided by the instrument will be shown on the
screen.
Click settings on the screen to control the instrument.
You can click the keys for operation.
The power key is disabled.
4
Under
[Refresh
250
ms,
When
[Refresh Interval]
screen refreshment.
Instead of updating the screen, the instrument will display the message
busy, such as performing a search, making numerical calculations, loading files, or saving files.
Find Quality Products Online at:
4
4
Screen refresh interval
on the computer.
®
CONTROL].
Interval], select the interval at which to refresh the screen.
1
s,
10
s,
30 s
is set to 250 ms, the image quality will be degraded to keep up with the
GlobalTestSupply
www.
ESC
key) are ignored.
).
[Loading . . .]
while being
.com
sales@GlobalTestSupply.com
Need help?
Do you have a question about the MEMORY HiLOGGER LR8450 and is the answer not in the manual?