Numerical Calculations After Measurement (Manual Calculations); Numerical Calculations After Measurement (Manual Calculations - Hioki MEMORY HiLOGGER LR8450 Instruction Manual

Performing Numerical Calculations

Numerical calculations after measurement (manual calculations)

This section describes how to use the instrument's control keys to perform numerical calculations
after measurement.
You can review calculation results by displaying the
numerical display on the right side of the screen to [Calc].
1
Press the
2
Once measurement completes, configure the numerical calculation.
See "Configuring numerical calculations" (p. 1 94).
3
Press the
4
Set the numerical display on the right side of the screen to [Calc].
The numerical calculation's settings will be displayed.
5
Press the
The numerical calculation set in step
Numerical calculations can also be performed using waveforms that have been loaded from media
(an SD Memory Card or a USB Drive). Once the waveform has been loaded, proceed to step
above.
Time split calculation cannot be performed manually.
Find Quality Products Online at:
START key to start measurement.
WAVE key to display the
ENTER key while [Execute]
GlobalTestSupply
www.
[Wave+Value]
[Wave+Value] screen.
3 3
is selected.
will be performed.
2
screen and then setting the
4 4
5 5
.com
sales@GlobalTestSupply.com
2