Real-Time Numerical Calculations (Automatic Calculations); Real-Time Numerical Calculations (Automatic Calculations - Hioki MEMORY HiLOGGER LR8450 Instruction Manual

Real-time numerical calculations (automatic calculations)

This section describes how to perform numerical calculations while measurement is in progress.
It also describes how to review calculation results at a given point in time on the
screen during measurement.
1
Configure the numerical calculation.
See "Configuring numerical calculations" (p. 1 94).
2
Press the
Numerical calculations will be performed in real time.
3
Press the
4
Set the numerical display on the right side of the screen to [Calc].
The numerical calculation results will be displayed, allowing you to review the calculation results at
any given point in time.
5
Select a numerical calculation of which you wish to display the result.
You can select a numerical calculation of which you wish to display the result from among
through
6
(When
wish to display the result.
Normal
Split
When
points under
7
Switch the channel using the
You can change the channel for which to display calculation results.
Find Quality Products Online at:
START key to start measurement.
WAVE key to display the
[Calc 10].
[Time split calculation]
Displays the values calculated using data from the start of measurement.

Displays the calculated values updated at regular intervals.
[Split]
have been selected, the first segmented time (can be changed to the date or number of data
[Display horizontal axis]) will be displayed underneath the calculation results table.
[<]
GlobalTestSupply
www.
[Wave+Value] screen.
3 3
5 5
is set to [Enable]) Select a numerical calculation of which you
and [>] keys (as necessary).
Performing Numerical Calculations
[Wave+Value]
4 4
6 6 7 7
.com
sales@GlobalTestSupply.com
[Calc 1]