Hioki MEMORY HiLOGGER LR8450 Instruction Manual page 256

3
Under [Mode], select a setting.
Station
Access point
Connect wireless unit
When setting
(1) (1)
(2) (2)
(1) Manual connection
1
Under [SSID], set an identification name for an access point.
Press the
instrument for their SSIDs. Choose the SSID you wish to connect to.
2
Under [Security], select an encryption protocol.
Off
WPA-PSK (TKIP)
WPA2-PSK (AES)
3
When encryption is enabled, set a password to connect to the access point.
4
Configure each setting.
See "Configuring LAN settings" (p. 2 45).
5
Press the
You can manually connect the instrument to or disconnect it from the access point.
(2) Automatic connection
Press the
The WPS function of a commercially available access point will be used to establish
connection (push-button type).
Find Quality Products Online at:
Works as a terminal that can connect to an access point in the wireless LAN.
Works as an access point.
 Performs measurement establishing LAN-connection with the wireless modules.
Use this mode to perform measurement with the wireless modules.
[Mode] to [Station]
1 1
2 2
3 3
5 5 1 1
ENTER key while [Search]
Does not encrypt data.
Encrypts data with WPA.

Encrypts data using WPA2.
ENTER key while [Connect]
ENTER key while [Execute]
GlobalTestSupply
www.
4 4
is selected to search wireless equipment close to the
or [Disconnect] is selected.
under [Auto connect] is selected.
.com
sales@GlobalTestSupply.com