Hioki MEMORY HiLOGGER LR8450 Instruction Manual page 308

Manual saving
Decimation
(text format only)
-2. Loading data
Loading saved data
5. Calculations
Numerical
calculations
Find Quality Products Online at:
SAVE
Data is saved when the
The user can choose either selective save or immediate save as the operation to perform
SAVE
when the key is pressed.
Selective save The user will be prompted to choose what to save: settings,
waveform data (binary format), waveform data (text format),
waveform data (MDF format), A2L file, numerical calculation
results (all calculations in one file or each calculation in its own
file), display image (PNG format).
Immediate save Data will be saved immediately when the
The type of data to save is set in advance along with the format
and range.
Filenames can be entered when saving data.
Decimate and save Off or a value from 1/2 to 1/100,000 (user-selectable)
Saved data Select from instantaneous values and statistical values.
When statistical values are selected:
Instantaneous values, maximum values, minimum values, and
average values will be saved for the thinning interval.
The user can specify a position and then load up to 256 M data points of previously saved
text-format data (when recording 1 analog channel; if recording n channels, 256 M/n data
points).
Number of calculations Up to 10 calculations simultaneously
Calculation content Average value, peak-to-peak value, maximum value, maximum
value time, minimum value, minimum value time, integral*
integration*
off count*
*1: Total, positive, negative, or absolute value (user-selectable)
*2: Threshold values can be set for individual channels.
Calculation range During recording:
After recording has stopped:
Time split calculation Disabled, enabled, or timed (user-selectable)
Disabled: Calculations performed for all data during recording
Enabled: Data for each segment of time, starting with the start
Timed:
GlobalTestSupply
www.
key is pressed.
1 2
, moving average* , on time*
2
Calculations performed for all data during recording
Calculations performed for all data in the internal buffer
memory, or for data in a calculation range specified by
the A/B cursors (on the vertical axis)
of measurement
Split time: Set DD HH:MM format
Calculations will be made at intervals of the segment
time based on the previously set reference time.
Reference time: Set in hours and minutes.
Split time: 1 min, 2 min, 5 min, 10 min, 15 min, 20 min,
30 min, 1 h, 2 h, 3 h, 4 h, 6 h, 8 h, 12 h, 1 d
.com
Basic Specifications
SAVE key is pressed.
1
,
2 2 2
, off time* , on count* ,
sales@GlobalTestSupply.com