Hioki MEMORY HiLOGGER LR8450 Instruction Manual page 291

Sending Emails
2
Configure the settings on the
• Select the address(es) to which you wish to send emails with the
[Destination 3]
• Enter the address(es) to which you wish to send emails in the
text fields.
String of up to 45 single-byte characters (example: abc@xyz.xx.xx)
• Enter either the
administrator or Internet provider.
SMTP mail server's name
String of up to 45 single-byte characters
SMTP mail server's IP address
_._._._
• [Connection security]
Set the method to use to secure communications with the SMTP server.
Set as instructed by your network administrator or Internet provider.
None
STARTTLS
SMTPS
[Port number]
•
Set the mail server's port number.
If the mail server uses a port other than the standard port (25), set that port number.
1 to 25
• [Sender address]
Set the sender's IP address.
String of up to 45 single-byte characters (example: logger@xyz.xx.xx)
• [Sender name]
Set the sender's name.
String of up to 32 single-byte characters (example: LOGGER)
• [Add Data]
Select whether to attach instantaneous value data to the email.
OFF

[Attach display image]
•
Select whether to attach a screenshot (PNG format) of the waveform screen to the email.
OFF

Find Quality Products Online at:
[General]
check boxes.
[Mail server name]
(_: 0 to 255) (example: 192.168.1.100)
Leaves communications unprotected.

Protects communications using STARTTLS.
Protects communications using SMTPS.
to 65535

(If the send condition is a start trigger, stop trigger, alarm, or regular transmission)
ON
,
, ON
GlobalTestSupply
www.
tab.
[Destination 1]
or [IP address] as specified by your network system
[Destination 1] to
to [Destination 3]
.com
sales@GlobalTestSupply.com