Hioki MEMORY HiLOGGER LR8450 Instruction Manual page 312

8. Other functionality
Even mark function
Waveform search
function
Jump function
Cursor measurement
function
Scaling function
Comment entry
function
Start state retention
function
Startup auto-
measurement
function
Find Quality Products Online at:
Even mark entry Assigns event marks when one of the following events occurs.
method (1) Pressing the
(2) With
(3) Inputting a signal to an external input terminal
(4) If an alarm is outputted (can be toggled between on and
Number of inputs Up to 1000 inputs per measurement
Search waveforms and display target location in the center of the waveform screen.
Search conditions Search by choosing level, window, maximum value, minimum
value, local maximum value, or local minimum value.
Search range All data in the internal buffer memory or data between the A/B
cursors (on the vertical axis)
Search targets Analog, pulse, logic, waveform calculations
Specify the event mark, A/B cursor position, trigger point, or waveform display position to
display in the center of the waveform screen.
Cursor display All channels or specified channels (user-selectable)
Cursor movement A, B, or simultaneous (user-selectable)
Types of cursors Vertical or horizontal (user-selectable)
Vertical
Display of the following values:
• Times at the A and B cursors
• Measured values at the A and B cursors
• Time lag between the A and B cursors
• Reciprocals of the time lags (frequencies) between any two
points selected from among the trigger point, A cursor, and B
cursor
• Differences in measured values between the A and B cursors
Horizontal
Display of the following values acquired across the selected
channels:
• Values at the A and B cursor
• Difference between values at the A and B cursors
Scaling settings can be configured separately for each channel.
Analog Set by conversion rate, by 2 points, by strain gage rating (Strain
Unit only), or by sensitivity (user-selectable)
Pulse (integration) Set by physical value per pulse or number of pulses per physical
value (user-selectable)
Pulse (rotational Set by conversion rate or by 2 points (user-selectable)
speed)
Temperature display in When display language is set to English, Fahrenheit
degrees Fahrenheit temperature scaling is available.
Enter titles and channel-specific comments (values, alphabetical characters, and
symbols).
On/Off (user-selectable)
When enabled, the system will enter the re-start state and automatically start recording if
the power is turned off during recording and then turned back on (or the trigger standby
state if using a trigger).
On/off (user-selectable)
When the function is enabled, the instrument will automatically start measurement on
startup (get into the trigger standby state when the trigger setting is enabled)
GlobalTestSupply
www.
START
key
[Mark] chosen on the screen, pressing the
key.
off).
.com
ENTER
307
sales@GlobalTestSupply.com