Checking Ftp Communications Status - Hioki MEMORY HiLOGGER LR8450 Instruction Manual

Data transmission times
Transfer time (s) = File size (KB) / transfer speed (KB/s) + transfer preparation time (s)
For more information about file sizes, see "11.9 File Size" (p. 3 95).
Use 4 MB/s as a rough transfer speed and 3 s as a rough transfer preparation time.
Example: For a 40 MB file

Checking FTP communications status

This section describes how to check the FTP communications status.
You can display the number of files sent by FTP, the number of transmission errors, and other
statistics.
>
1
Press the
The settings window will open.
2
Under
Total, Sent, Failed,
The counters will be reset to 0 under the following circumstances:
• Press the
Find Quality Products Online at:
Transfer time = 40 MB/4 (MB/s) + 3 (s) = 10 + 3 (s) = 13 (s)
>
ENTER key while [FTP data auto send settings...]
[FTP communication status], check the file counters.
Unsent
ENTER key while [Clear]
GlobalTestSupply
www.
2 2
is selected.
Sending Data Using the FTP Client
1 1
is selected.
.com
sales@GlobalTestSupply.com